PET perform beam robot are designed for take-out of 350cc-1500cc PET perform, applicable to all types of PET injection mold machine ranging from 200T to 600T with 8~48 cavities mold. Installed on fixed platen and place PET outside of rear safety door. Enclosed cooling system on EOAT to cool the taken-out product., greatly shorten cooling time in mold and increasing output. With AC servo motor driven, take out products at high speed.
Structure
Integral arm design, super strong structure and with high rigidity linear slide rail on traverse side-entry axis, ensured long use life. Operate with belt to make it clean and without oil sludge. With AC servo motor driven, take out products at high speed with accurate position.
Waiting out of safety door.
Swivel-in, sucking and waiting
IMM ejctor
Swivel-out to place products.
Rotated by 90ﾟ and coercive cooling products.
Rotate back and standby
User-friendly touch type LCD control screen.
Full numerical setting, display and record the failure automatically.
Special EOAT keeps the PET from damage, coercive cooling shortened the cooling time in mold.
Han-held touch panel controller.
Touch panel screen is easy to learn and operate.
Hand-panel controller makes it convenient to adjust robot.

Vacuum pressure detecting to ensure EOAT sucked products. It will give alarm and stopped if EOAT failed to suck products.