Performance,speed,stability,and durability...all key attributes of the Phoenix series swing-arm robots make them ideally suitable for sprue separation and parts removal on injection moulding machines from 50 tonnes to 400 tonnes.

The Phoenix series offers take -times available for sprue separation and parts removal.Self-lubricating pneumatic drive system affords low maintenance ,exceptional stability and reliability.This series of robots are constructed on modular principle to ensure high precision and lightness.The main arm rides vertically on alinear slide-rail and slides horizontally (crosswise)on two roller guide-ways,no maintenances required and smooth running and the elimination of play/slack is ensured.Travel cushionson the vertical axis minimize vibration and ensure smooth deceleration;hydraulicshock absorbers are fitted on the crosswise axis for efficient damping.

For maximum flexibility the arm can be easily adjusted to release runner/parts atthe operator or the rear side of the machine. Swing angle can be freely adjtsted between 60to90 degree through a positive but easily adjusted location fitting on the cylinder-driven oscillating arm.The manual clamp system on the Phoenix series of robots allowd them to swing clear of the mould area in seconds;without the use of tools. Built-in ratchet mechanism, which controls motiong of the robot arm out of the mould area,enables easy mould changes or maintenance.
A large LCD display provides simple programming and setting of all parameters.There are eight(8)standard programmes of preset motion sequences are installed and additiongally,up to twelve(12)"Teach programmes(created by the operator)can be stored The built-in memory can record up to fifty(50)sets of mould programmes making this series of robots fully capable of meeting nearly all processing requirements.

Pare output ports are available for controlling various auxiliary equipment such as:conveyor indexing,indexing, silicon spraying and de-gatingetc.Audible and visible operationalfault diagnoses are included as standard. Operational sequences and setup parameters are programmes are permanently saved even if power is shut off.