Performance,speed,stability,and durability...all key attributes of the
Phoenix series swing-arm robots make them ideally suitable for sprue separation
and parts removal on injection moulding machines from 50 tonnes to 400 tonnes.
The Phoenix series offers take -times available for sprue separation and parts
removal.Self-lubricating pneumatic drive system affords low maintenance
,exceptional stability and reliability.This series of robots are constructed on
modular principle to ensure high precision and lightness.The main arm rides
vertically on alinear slide-rail and slides horizontally (crosswise)on two
roller guide-ways,no maintenances required and smooth running and the
elimination of play/slack is ensured.Travel cushionson the vertical axis
minimize vibration and ensure smooth deceleration;hydraulicshock absorbers are
fitted on the crosswise axis for efficient damping.
For maximum flexibility the arm can be easily adjusted to release runner/parts
atthe operator or the rear side of the machine. Swing angle can be freely
adjtsted between 60to90 degree through a positive but easily adjusted location
fitting on the cylinder-driven oscillating arm.The manual clamp system on the
Phoenix series of robots allowd them to swing clear of the mould area in
seconds;without the use of tools. Built-in ratchet mechanism, which controls
motiong of the robot arm out of the mould area,enables easy mould changes or
A large LCD display provides simple programming and setting of all
parameters.There are eight(8)standard programmes of preset motion sequences are
installed and additiongally,up to twelve(12)"Teach programmes(created by the
operator)can be stored The built-in memory can record up to fifty(50)sets of
mould programmes making this series of robots fully capable of meeting nearly
all processing requirements.
Pare output ports are available for controlling various auxiliary equipment such
as:conveyor indexing,indexing, silicon spraying and de-gatingetc.Audible and
visible operationalfault diagnoses are included as standard. Operational
sequences and setup parameters are programmes are permanently saved even if
power is shut off.